85

The PE1850 system board is secured to the chassis with a:

  Phillips-head screw  
* Spring-locking retention pin  
  Thumb screw  
  Locking tab  

The PowerEdge 2800 has single or dual _________ power supplies.

* 930W  
  400W 
  720W  
  280W 

Which of the following operating types are available in a PowerEdge 800's BIOS for the SATA Controller BIOS field?
* ATA Mode  
  RAID 5 Mode  
  Mirror Mode  
* RAID Mode  

The emulation types that can be selected for the USB flash drive in the PE1800 are:

* Hard disk  
* Floppy  
* Auto  
  BIOS  

The PowerEdge 2800 has the following hot-plug capable slots:

* One PCI Express x4.  
* One PCI Express x8.  
  32-bit 33MHz PCI.  
  Three PCI-X.  

The PowerEdge 2800 has the following field replaceable units:

* Power supply 
* Riser card 
* Processor fan 
  AGP Video card  

Which RAID options are valid for a PowerEdge 800?

* CERC SATA/6 Channels  
* PERC4/SC -- SCSI U320  
  CERC SATA/4 Channels  
  Driver Based -- SATA RAID  

The PE1850 contains the following hard-disk drive configurations:

  Three SCSI Hot-pluggable  
  Two SATA Hot-pluggable  
* Two SCSI Hot-pluggable  
  Three SCSI  
(--)

The PE1850 is sold with the following features:

  External optional USB flash drive  
* Support for USB 2.0  
* SCSI-3 HDDs 
  ATI Rage PRO PCI Express card 

Before removing the system fan from the PE1850, which of the following components must be removed?

  Hard-disk drive 
  Power Supply  
* Front bezel  
* Chassis cover 

Which of the following components must be removed first from the PE1850 before removing the control panel?

* SCSI backplane  
* Chassis cover  
  Power Supplies 
* Front bezel  
(Front Bezel??)

Both internal and external diskette drives are optional on the PE2850.

*  False 
   True 

The PE2850 contains the following back external connectors:

  Two 4-pin USB 1.0 
* 15-pin video  
* Two RJ45 NIC  
* 9-pin serial  

Which of the following components must be removed first from the PE2850 before removing the Riser Card?

* Front bezel  
* AC power cord 
  DC Power Supply 
* Chassis cover  

The ROMB memory module in the PE2850 is located on the:

  Control Panel  
* Riser card  
  ERA card  
  System board 

How many SATA ports are located on the PE750's mainboard?

  Four 
  Six 
* Two 
  Three 

How many SATA ports are located on the PE700's mainboard?

  Four 
  Three 
* Two 
  Six 

When removing the control panel from a PE750, the light pipes separate from the control panel board.

* True 
  False 

When removing the processor shroud from a PE700, where is the processor shroud release tab located?

  Inside the chassis, on the side of the shroud. 
  Protruding through the front of the system chassis. 
* Protruding through the rear of the system chassis. 
  On top of the shroud, attached to the fan.  

The PE SC1420 can contain the following expansion bus types:

* PCI-X  
  SCSI  
* PCI  
* PCI Express  

What processor can be used in the PE SC1420?

* Intel EM64T Xeon  
  1.26 GHZ/512K cache P4  
  1GHZ/256K cache PIII 
  700 MHZ Pentium III  

The chassis intrusion switch in the PE SC1420 is attached via a cable to the:

  Front panel 
* I/O panel  
  System board 
  Power Supply  

When removing the front bezel on a PE SC1420, the CD-ROM must first be removed.
(??)
  True 
* False 

The SCSI backplane is secured to the PE1800 drive bay with:

* One thumbscrew  
  The hard-disk drive power cables  
  The hard-disk drive bay 
  Two Phillips-head screws  

The chassis intrusion cable must be removed during removal of the control panel from the PE1800.

  False 
* True 

What secures the SCSI backplane to the chassis of a PowerEdge 800?

  Two philips head screws  
* One thumbscrew  
  One metal clip 
  Two plastic clips  

The processor cover must be removed before replacing the system memory in a PowerEdge 800.

  True 
* False 

The PowerEdge SC1425 is capable of running a 64-bit operating system.

* False 
  True 

The PowerEdge SC1425 can support up to two processors. 

* True 
  False 

How many system fans does a PowerEdge SC1425 contain?

  Four  
* Five  
  Three  
  Two  

What secures the system board in a PowerEdge SC1425 to the chassis?

  A single thumbscrew  
* A single philips head screw  
  Two thumbscrews  
  Two plastic clips  

Dell OpenManage Server Assistant is used to install third-party tape backup software on Dell PowerEdge servers.

* False 
  True 

You will be prompted to insert each of the three operating system disks when using OpenManage Server Assistant to install Red Hat Enterprise Server version 3.

*  False 
   True 

The Dell OpenManage Server Administrator can perform diagnostics, system memory, and disk rebuilds.

  False 
* True 

The Dell OpenManage Storage Services provides storage management of SCSI, SATA, and ATA hard-disk drives.

  True 
* False 


2nd (1)
Dell OpenManage Server Administrator is software that allows you to monitor, configure, update, and manage individual Dell systems.

  False 
* True 

The PowerEdge SC RAID Storage Manager is supported under Novell Netware.

* False 
  True 

When using the SC RAID Manager software, which RAID controllers are supported ?

* Adaptec 39320 
* CERC SATA 2s 
* CERC SATA 6ch 
  PERC 4/DC 

To rebuild a failed disk using the SC RAID Storage Manager, right-click the failed drive, select Rebuild Drive, and then click Yes to confirm the rebuild.

* True 
  False 

The Embedded Server Management firmware on PowerEdge servers can be updated within MS Windows 2000.

* True 
  False 

The Baseboard Management Console firmware on a PowerEdge server can be updated within MS Windows 2003.

  False 
* True 

The Baseboard Management Console firmware is found on eight generation PowerEdge servers.

  True 
* False 

2nd (1)
PowerEdge SC servers supports Baseboard Management Console.

* False 
  True 

Which of the following must be done before removing a DVD/CD-ROM drive from a PE750?

* Remove the interposer card.  
  Remove the floppy disk drive.  
  Remove the processor shroud.  
* Remove the front bezel.  

The PE SC1420 can contain up to __________ one-inch SATA drives on a SATA controller card.

  One 
  Two 
* Four 
  Three 

The power distribution board in the PE1800 is secured to the chassis with:

* One thumbscrew. 
  Cable retention clips 
  Velcro straps.  
  Nylon cable ties.  


Which of the following DIMM sizes are supported in a PowerEdge SC1425?

  128MB  
* 1GB  
* 2GB  
* 256MB  

The system BIOS on a PowerEdge Server can be updated within Red Hat Enterprise Linux 3. 
* True 
  False 

Which of the following PowerEdge system board firmware can be updated within Windows 2003?

  ESM 
* BMC 
* BIOS 
  Modem 


----------------------------------------------------------------------------------
80

The PE1800 contains the following external connectors

  Two RJ45 NIC  
* One video  
* One serial  
* Four 4-pin USB 2.0 

The PowerEdge 2800 has single or dual _________ power supplies.

* 930W  
  400W 
  720W  
  280W 

The PowerEdge 2800 has the following field replaceable units:

  AGP Video card  
* Processor fan 
* Power supply 
* Riser card 

Which RAID options are valid for a PowerEdge 800?

* CERC SATA/6 Channels  
* PERC4/SC -- SCSI U320  
  CERC SATA/4 Channels  
  Driver Based -- SATA RAID  

The PE1850 is sold with the following features:

  External optional USB flash drive  
* Support for USB 2.0  
* SCSI-3 HDDs 
  ATI Rage PRO PCI Express card 

The PE1850 contains the following hard-disk drive configurations:

  Three SCSI  
* Two SCSI Hot-pluggable  
  Two SATA Hot-pluggable  
  Three SCSI Hot-pluggable  

The PE1850 system board is secured to the chassis with a:

  Locking tab  
  Phillips-head screw  
  Thumb screw  
* Spring-locking retention pin  

Before removing the system fan from the PE1850, which of the following components must be removed?

  Hard-disk drive 
  Power Supply  
* Front bezel  
* Chassis cover

The PE2850 contains the following back external connectors:

  Two 4-pin USB 1.0 
* 9-pin serial  
* Two RJ45 NIC  
* 15-pin video  

The PE2850 can contain a maximum of ________ internal hard-disk drives.

* six  
  eight  
  three  
  four  

Which of the following components must be removed first from the PE2850 before removing the Riser Card?

* Front bezel  
* AC power cord 
  DC Power Supply 
* Chassis cover  

The ROMB memory module in the PE2850 is located on the:

  System board 
  Control Panel  
* Riser card  
  ERA card  

The riser board in a PE750 contains which of the following PCI slot types?

* PCI-X 64-Bit/66MHz 
  PCI 64-Bit/33MHz 
* PCI 32-Bit/33MHz 
  PCI 32-Bit/66MHz 

How many SATA ports are located on the PE700's mainboard?

  Three 
* Two 
  Six 
  Four 

Which of the following components must be removed first from the PE2850 before removing the Riser Card?

* AC power cord 
  DC Power Supply 
* Front bezel  
* Chassis cover  


When removing the processor shroud from a PE700, where is the processor shroud release tab located?

  Inside the chassis, on the side of the shroud. 
  Protruding through the front of the system chassis. 
* Protruding through the rear of the system chassis. 
  On top of the shroud, attached to the fan.  

When removing the control panel from a PE750, the light pipes separate from the control panel board.

* True 
  False 

The PE SC1420 can contain the following expansion bus types:

* PCI-X  
  SCSI  
* PCI  
* PCI Express  

The PE SC1420 can contain up to __________ one-inch SATA drives on a SATA controller card.

  One 
  Three 
  Two 
* Four 

When removing the front bezel on a PE SC1420, the CD-ROM must first be removed.

  False 
* True 

The front bezel on a PE SC1420 must be removed to access the hard-disk drives.

  True 
* False 

The chassis intrusion cable must be removed during removal of the control panel from the PE1800.

   False 
*  True 

The SCSI backplane is secured to the PE1800 drive bay with:

* One thumbscrew  
  The hard-disk drive power cables  
  The hard-disk drive bay 
  Two Phillips-head screws  

What is used to secure expansion cards in a PowerEdge 800 chassis?

* Philips Head Screw  
  Flat Head Screw  
  Plastic Clip  
  Metal Clip  

The processor cover must be removed before replacing the system memory in a PowerEdge 800.

  True 
* False 

What is the maximum number of hard-disk drives that can be installed into a PowerEdge SC1425
  Four 
  One 
  Three 
* Two 

The PowerEdge SC1425 can support up to two processors. 

* True 
  False 

How many system fans does a PowerEdge SC1425 contain?

* Five  
  Two  
  Four  
  Three  

What secures the system board in a PowerEdge SC1425 to the chassis?

  A single thumbscrew  
* A single philips head screw  
  Two thumbscrews  
  Two plastic clips 

You will be prompted to insert each of the three operating system disks when using OpenManage Server Assistant to install Red Hat Enterprise Server version 3.

* False 
  True 

Dell OpenManage Server Assistant can be used to configure the RAID array before installing the operating system.

* True 
  False 

The Dell OpenManage Storage Services supports Fibre Channel hard-disk drives and USB memory sticks.

* False 
  True 

The Dell OpenManage Server Administrator can perform diagnostics, system memory, and disk rebuilds.

* True 
  False 

Dell OpenManage Server Administrator is software that allows you to monitor, configure, update, and manage individual Dell systems.

* True 
  False 

The PowerEdge SC RAID Storage Manager can perform a disk rebuild within Linux.

  True 
* False 

The PowerEdge SC RAID Storage Manager is supported under Novell Netware.

  True 
* False 

To rebuild a failed disk using the SC RAID Storage Manager, right-click the failed drive, select Rebuild Drive, and then click Yes to confirm the rebuild.

  False 
* True 

The Baseboard Management Console firmware on a PowerEdge server can be updated within MS Windows 2003.

* True 
  False 

The system BIOS on a PowerEdge Server can be updated within Red Hat Enterprise Linux 3. 

* True 
  False 

The Baseboard Management Console firmware is found on eight generation PowerEdge servers

  False 
* True 

The Embedded Server Management firmware on PowerEdge servers can be updated within MS Windows 2000.

  False 
* True

 
---------------------------------------------------------------------------------
83

A blue blinking system status indicator on the PowerEdge 1800 indicates:

  A power supply failure.  
  The system is running diagnostics.  
* The system identification button has been pressed to identify the server in a rack.  
  A system fan failure.  

The PowerEdge 2800 has the following hot-plug capable slots:

* One PCI Express x4.  
* One PCI Express x8.  
  32-bit 33MHz PCI.  
  Three PCI-X.  

What field replaceable units on the PE 2800 must be removed prior to replacing the diskette drive?

* CD/DVD drive 
* AC Power cable 
* Front Bezel 
  Chassis Cover 

The PowerEdge 800 is a dual processor system
* False 
  True 

The PE1850 contains the following hard-disk drive configurations:

  Two SATA Hot-pluggable  
  Three SCSI  
  Three SCSI Hot-pluggable  
* Two SCSI Hot-pluggable  

The PE1850 is sold with the following features:

* Support for USB 2.0  
  External optional USB flash drive  
* SCSI-3 HDDs 
  ATI Rage PRO PCI Express card 

Which of the following components must be removed first from the PE1850 before removing the control panel?

  Power Supplies 
* SCSI backplane  
* Front bezel  
* Chassis cover  

The PE1850 system board is secured to the chassis with a:

  Locking tab  
  Phillips-head screw  
  Thumb screw  
* Spring-locking retention pin  

The PE2850 contains the following back external connectors:

* 15-pin video  
* Two RJ45 NIC  
  Two 4-pin USB 1.0 
* 9-pin serial  

The PE2850 can contain a maximum of ________ internal hard-disk drives.

  four  
* six  
  eight  
  three  

The ROMB memory module in the PE2850 is located on the:

* Riser card  
  System board 
  ERA card  
  Control Panel  

The riser board in a PE750 contains which of the following PCI slot types?

  PCI 64-Bit/33MHz 
  PCI 32-Bit/66MHz 
* PCI-X 64-Bit/66MHz 
* PCI 32-Bit/33MHz 

How many SATA ports are located on the PE750's mainboard?

  Six 
* Two 
  Four 
  Three 

When removing the control panel from a PE750, the light pipes separate from the control panel board.

  False 
* True 

When removing the processor shroud from a PE700, where is the processor shroud release tab located?

  On top of the shroud, attached to the fan.  
  Inside the chassis, on the side of the shroud. 
* Protruding through the rear of the system chassis. 
  Protruding through the front of the system chassis. 

PE SC1420 can contain the following expansion bus types

* PCI Express  
* PCI-X  
  SCSI  
* PCI  

The PE SC1420 can contain up to __________ one-inch SATA drives on a SATA controller card.

  Two 
  Three 
  One 
* Four 

The front bezel on a PE SC1420 must be removed to access the hard-disk drives.

  True 
* False 

When removing the front bezel on a PE SC1420, the CD-ROM must first be removed.

  True 
* False 

The chassis intrusion cable must be removed during removal of the control panel from the PE1800
* True 
  False 

The SCSI backplane is secured to the PE1800 drive bay with:

  The hard-disk drive bay 
  The hard-disk drive power cables  
  Two Phillips-head screws  
* One thumbscrew  

The processor cover must be removed before replacing the system memory in a PowerEdge 800.

  True 
* False 

What is used to secure expansion cards in a PowerEdge 800 chassis?

* Philips Head Screw  
  Flat Head Screw  
  Plastic Clip  
  Metal Clip  

Which of the following DIMM sizes are supported in a PowerEdge SC1425?

  128MB  
* 2GB  
* 1GB  
* 256MB  

What is the maximum number of hard-disk drives that can be installed into a PowerEdge SC1425?

* Two 
  Three 
  Four 
  One 

What secures the system board in a PowerEdge SC1425 to the chassis?

  A single thumbscrew  
* A single philips head screw  
  Two thumbscrews  
  Two plastic clips 

How many system fans does a PowerEdge SC1425 contain?

  Two  
* Five  
  Three  
  Four  

Dell OpenManage Server Assistant can be used to configure the RAID array before installing the operating system.

  False 
* True 

Dell OpenManage Server Assistant is used to install third-party tape backup software on Dell PowerEdge servers.

* False 
  True 

The Dell OpenManage Storage Services provides storage management of SCSI, SATA, and ATA hard-disk drives.

  False 
* True 

Dell OpenManage Server Administrator is software that allows you to monitor, configure, update, and manage individual Dell systems.

* True 
  False 

The Dell OpenManage Server Administrator can perform diagnostics, system memory, and disk rebuilds.

  False 
* True 

When using the SC RAID Manager software, which RAID controllers are supported ?

* Adaptec 39320 
* CERC SATA 2s 
* CERC SATA 6ch 
  PERC 4/DC 

To rebuild a failed disk using the SC RAID Storage Manager, right-click the failed drive, select Rebuild Drive, and then click Yes to confirm the rebuild.

* True 
  False 

The PowerEdge SC RAID Storage Manager can perform a disk rebuild within Linux.

  False 
* True 

Which of the following PowerEdge system board firmware can be updated within Windows 2003?

  ESM 
* BMC 
* BIOS 
  Modem 

The system BIOS on a PowerEdge Server can be updated within Red Hat Enterprise Linux 3. 

  False 
* True 

The Baseboard Management Console firmware is found on eight generation PowerEdge servers.

  False 
* True 

The Embedded Server Management firmware on PowerEdge servers can be updated within MS Windows 2000.

* True 
  False 

Dell OpenManage Server Administrator can not remotely administer monitored systems, including BIOS setup, shutdown, start up, and remote access controller (RAC) security.
  True 
* False